Ready to enjoy merry Christmas! But, you have to hold on because of the incomplete decoration. Well, that’s so sad. Many of the times it happens that the light you have for your Christmas is not working completely or else has stopped working totally. What to do? Where to go at the last moment?
Don’t freak out at all, as Live Enhanced, is always there to help you with your every concern. As we all know, lights are the lifeline to everyone whenever they are about to do Christmas tree decoration. Thus, we have come up with the simplest ways on how to repair Christmas lights? Let’s explore them step-by-step:
Step 1: Check the Fuse
Repairing of the Christmas tree lights is usually a simple task for one to do. At first, pull over the covering from the plug and check whether the fuse is working or not. If you think so then replace the fuse with the new one, you can easily get new fuses from nearby electronic stores. It may start functioning as earlier or else you have to then buy a new set of illuminance. The numbers of fuses vary from the luminescence you have, do not forget to fix the covering again once you are done with your work.
Step 2: Test Light Bulb – Option 1
Next, you have to look at an inexpensive tester, where you have to fix each Christmas light bulb through a hole in a tester, some kind of tester does perform like this. You can get it from anywhere, store at the glow items are sold or online. Changing the bulb will fix your entire strand of gleam. With the help of a tester, you will come to a result about which are bad or need to be replaced. For that, you have to fix your accessory exactly in the electric outlet correctly, the narrow ‘hot’ blades place it in a narrow slot and wide neutral blades into wide slots.
Step 3: Test Light Bulb – Option 2
If you have any other, then avoid the earlier step. So, with other Christmas light testers, you simply touch each bulb. This tester is very simple to use as it can check your entire strand of lights within a few minutes. You never know, sometimes you can get two or more defective bulbs. So, just finding one defective bulb won’t make your whole strand appropriate. All you need is the cheerful shine of the holiday’s gleam.
Step 4: Christmas Lights Safety/ Storage
Based on cost, the durability of the tapers depends on it. If it’s inexpensive, then it will work well for no long time. In the last part of the season, you can remove this beacon very carefully; don’t take out harshly on wires. A broken bulb, defective socket, or frayed wire leads to the malfunctioning of the filament.
Before storing them, you can check once that they are still working. After taking down the strand, carefully fold and wrap them into their related or original container. Be careful about the bulbs don’t get bang each other. So, if you want your Christmas light to work for a long time, then you have to be careful about the storage of the lights. Stuffing them in a box or keeping it carelessly won’t work even for the next time. Almost all bulbs have short expectancies, works for only about 1, 000 to 1, 500 hours, and all this depends on the way of your usage.
The only tool necessary to make your Christmas illuminance glow is a bulb tester, and set you about how to fix them!