How to Sharpen Meat Grinder Blades Safely

meat grinder

Nowadays, the meat grinder blade has become available everywhere as a kitchen gadget. They are highly essential when it comes to chopping vegetables and meats, along with other ingredients. Despite the fact that it cuts things smoothly, at times, the meat grinder blade tends to malfunction. This often is as a result of a reduction in the sharpness of the blade, making the chopping process a bit challenging. To overcome this challenge, it is highly advisable to sharpen it. There are several ways in which you can use to sharpen your meat grinder. Despite the sharpening process being simple, it will take you some time to get ready. In this article, we shall be focusing on how to sharpen meat grinder blades safely at Live Enhanced.

meat grinder


Sharpening a meat grinder blade safely

There are three primary ways in which you can use in sharpening your meat grinder blade. These methods include;

  • Using a belt sharpener
  • The use of a sharpening stone
  • Sandpaper

The best part is that all of the above methods are safe to use, and they require minimal effort. However, the sandpapering process is said to be the most prominent method; this is because the operation is trouble-free.

Essential tools

When sharpening your meat grinder blade, you will require the following necessary tools;

  • Gloves
  • Screwdriver
  • Sandpaper
  • Water
  • Soft and clean cloth
  • Sheet of glass

meat grinder


Setting up the sharpening area

Setting up the sharpening area should be the first thing you should do. Ensure that the sharpening is safe, open, and secure. In addition to that, it should be free from obstacles and flat as well. You will then lay down your mirror on the floor.

Disassemble your meat grinder

During this stage, you will have to disassemble your meat grinder. The best thing is that the process is relatively easy. You might, however, consider getting ideas from the operational manual, which will be of great assistance. The manual features a disassembling and mounting process.

However, most users tend to be arrogant when it comes to security issues when disassembling the meat grinder. Most of them ignore wearing gloves, and they tend to misplace or lose the screws. Therefore, you must have your screw in a safe location altogether.

Avoiding wearing gloves is an unfortunate tendency, which is common among most individuals. When disassembling a meat grinder, you should keep in mind that there are sharp elements present that might cause injury. It will be best if you put on gloves to avoid any accidents from occurring.

meat grinder


Cleaning meat grinder parts

You should consider cleaning the parts of your meat grinder to aid in improving its performance significantly. Usually, there might present of excess meats, oils, or greases attached. You should use a clean and soft cloth in cleaning up and get rid of additional wastes that are present in the components.

Use the mirror

Place a mirror on a flat surface; ensure that the surface is very flat. When working on an uneven surface, you might not be comfortable while sharpening, or the mirror might break. Use 120-grit sandpaper on your mirror. You might require some minor adjustments with your sandpaper and mirror. When your sandpaper and the mirror do not fit, you might consider cutting the length size of your sandpaper. Operating with a size that does not fit, it will be challenging to work with your sandpaper and the glass.

meat grinder


Tests your blade

Before you commence on sharpening your blade, it is advisable to check on the sharpness of the blade. By doing so, you will be able to determine how much do you want to sharpen your blade. To assess the sharpness, you might consider using a scrap pepper.

Sharpening your blade

After testing your blade sharpness, you can now commence on sharpening it. Hole your blade at a 45-degree angle and then rub it on the surface of your sandpaper. Assess the edges and ensure that they are coming into contact with your sandpaper. To get uniform sharpness, you will have to rotate the blade while sharpening it.

Final verdict

Once you are done sharpening your blade, clean it using clean water. During this process, ensure you get rid of unwanted elements. Once done, you will mount your meat grinder back as it was before; you should ensure that you have the protective gear when installing it.

Recommended Articles